A Guide to Installing House Shutters
If you have basic carpentry skills and know how to use an electric drill you can install your own house shutters. If you won’t have time to do the job, you can pay a carpenter to install your new shutters for you. However, installing house shutters is very simple and can be done by anyone with basic knowledge.
Do not be put off by the prospect of installing your new house shutters. If your neighbors can do this undemanding job, so can you. You simply need to learn the basics. There are two recommended ways to install your shutters. You can pick an inside mount or an outside mount. It is recommended to use an inside mount that can be done straight from your open window.
Inside mount installation
When you perform an inside mount installation, the shutter is mounted flush with the inside of the window frame on the window jamb. This is usually a simpler manner of installation and is used primarily by carpenters for the reason that it is cleaner and requires no framing strips.
Begin by checking to see that the window jamb is in good shape. Next, you should attach the shutter hardware with screws. This will require drilling a hole through the jamb at certain points so that the hardware can be screwed into the window jamb. The jamb should be solid so that the screws will be secure.
When you have screwed on the hardware, you have to see if the shutters are straight with the window. You might use a level to check that that they are lined up. Follow the instructions of the supplier as each brand of inside mounted shutter is different. If you know how to use a drill motor, you will be able to quickly perform an inside mount for your shutters.
Outside mount installation
Obviously, an outside mount attaches to the outside of the window, usually into the trim, and sometimes the wall. If you wish to use an outside mount on shutters inside your house, please don’t screw the unit into drywall unless it is anchored as the unit will just fall off of the wall. Some people prefer an outside mount which allows the shutters to be less than perfect as regards the measurements, which you just can’t do with an inside mount. However, the outside mount does not look as professional as the inside mount.
Make sure you use your level when installing house shutters so you can be certain that your shutters are straight. Your eyes might be fooled, but a level will not. You will need an electric drill, a set of apexes, and also toggles if you are installing into drywall without a stud.
Do not be hesitant to install your house shutters yourself. This is fairly easy and once you have installed one unit, the rest will come very easily. All you need are the proper tools, namely, a screwdriver, drill, toggle mounts (if installing into drywall) and a level, you can complete this job easily and quiclky.
Similar Posts:
- Your Various Options in Outdoor Shutters
- Add a Touch of Elegance to Your House
- Decorating the Exterior of Your House with Shutters
- Add an Elegant Touch to Your House’s Exterior
- Getting Vinyl Shutters for Your Home
Like this post? Publish It On Your Own Blog